Stu Kenson Twinzer (S) - Apex (FCS (Twin Tab) / Futures (9 Degree))

Longtime surfer/shaper Stu Kenson has cemented his place as one of San Diego's most talented and respected custom board builders over the course of the past 4-5 decades. He started doing ding repair at the age of 13, and shaped his first board during the summer of 1971. Stu Kenson has cultivated a dedicated, worldwide following and is know for his performance shortboards, big wave guns, longboards and various other alternative board designs (single, twin fish, twinzer and mid-length board). Per Stu, these “pair with essentially all sizes and styles of Twinzer set ups; from performance longboards, mid-length eggs, fish boards and high performance shortboards.” The Stu Kenson TWINS are a high performance upright template. Designed for his twinzer boards but can be used separately in any performance Twins and variety of other boards. Twin Base : 4.54" Height : 5.08" Area : 17.20 in ² Rake: 32.6° Foil : Flat Material: G10 Canard Base: 2.72" Height: 2.96" Area: 6.40 in² Rake: 34.3° Foil: Flat Material: G10 Cant angle for Futures based twins : 6.5 Degree The Stu Kenson CANARD fins were designed to be paired with his Small Twin template but can be used in any setup calling for canards. NOTE: If front canard fins use a 0-degree plug then select the 9-degree cant angle; if the plugs are 9-degree then select the 0-degree cant angle.