Innuendo — Build Specifications

STOCK DIMENSIONS

Length, width, thickness, and volume are sourced verbatim from the Innuendo contour PDF (canonical Boards/innuendo.md). Nose and tail rocker are linearly scaled across the 5-master Daniel Batch 1 anchors (4'9", 5'4", 5'10", 6'2", 6'7"); scaling is virtually constant at ~0.0645"/in nose and ~0.0322"/in tail across the entire stock range. 6'6" is the canonical cap; 6'7" is reserved for the master file extrapolation only and does not ship as a published stock size.

OUTLINE

Wide point

forward

Wide point (in)

~33.5" from tail at 5'10" (just forward of center)

Parallel section length

~12–14" through midsection

Nose width range

~10.5"–11.5" across 4'9"–6'6"

Tail width range

~13.5"–15.5" across 4'9"–6'6"

ROCKER

Entry

medium-high

Exit

medium

Medium-high entry preserves drop-in confidence on punchy chest-to-overhead surf. Medium exit keeps speed alive through the flat middle of a wave. Lundquist runs flatter rocker than peer HPSBs by design — that's the house signature, and it shows on the Innuendo.

BOTTOM CONTOUR

Family: Single concave through front 2/3 → slight double concave through back 1/3

• Single concave deepest under the front foot (~3/16" depth at 5'10")
• Single transitions to slight double 10–12" forward of the tail
• Double depth ~1/16"–1/8" through the fin cluster
• Blends to flat in the last 4" before the tail

Single concave loads the lead foot for clean rail engagement and acts as the gas pedal off the bottom turn. The slight double through the fin cluster splits water for drive out of turns without locking the tail in.

RAILS

Profile: 60/40 mid → hard-down through last 12"

• Wide point sits just forward of center
• Tucked-under edge from belly through midsection (60/40 mid feel)
• Hard-down rails (sharp-edge-pulled-to-the-bottom) at and behind the fin cluster
• Foil-forward distribution per House Style — thin-tail signature
• Same outline at all 22 stock sizes per House Style — Innuendo scales without changing identity

GLASS SCHEDULE

Deck

4oz S-cloth + 4oz warp

Bottom

4oz S-cloth

Finish

sanded

Standard Innuendo build is sanded finish (4oz S-cloth + 4oz warp deck / 4oz S-cloth bottom, clear). Gloss + polish available at +$200 upcharge. White carbon tail patch (+$35) recommended for heavier riders or step-up intent. Per `Boards/innuendo.construction.md` — pricing tied to `custom-pricing.ts > BASE_PRICING['twin-fin-shortboard-stepup']`.

SHAPER NOTES